Filter
Top Products
B-8
Multiprocessor WAN Application Module User Guide
OL-7469-04
Appendix B Troubleshooting
MWAM System Error Messages
Error Message MWAM_FLASH-3-FLASH_LOCKED_BY_OTHER_CPU: "%s"
Explanation
The other CPU within this complex is programming the shared flash, flash
programming must complete before proceeding with reload
Recommended Action Wait for the other CPU to complete its flash programming operation, then
reenter the CLI command.
NVRAM Error Messages
Error Message %MWAM_NVRAM-3-ERR: "%s"
Explanation
An error occurred while saving/erasing the configuration from flash.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.
Error Message MWAM_NVRAM-5-INFO: "%s"
Explanation
Information showing the state of the NVRAM configuration in the BootFlash.
Recommended Action If this message recurs, copy the error message exactly as it appears on the
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
“OUTPUT_INTERPRETER.” Also perform a search of the Bug Toolkit “BUG_TOOLKIT.” If you
still require assistance, open a case with the Technical Assistance Center via the Internet
“TAC_CASE_OPEN,” or contact your Cisco technical support representative and provide the
representative with the gathered information.
Error Message %MWAM_NVRAM-5-KRUSTY_NVRAM_NOT_FOUND: "%s"
Explanation
Information indicating there is no NVRAM pointer.
Recommended Action This indicates either NVRAM has not initialized properly, or it is corrupted.
FUR Error Messages
Error Message %MWAM_FUR-3-ERR: "%s\n"
Explanation
An error occurred while upgrading or invalidating the Field-Upgradeable ROMMON.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.