Clarke CFP-170 Sander User Manual


 
Clarke
®
LIMITED U.S. WARRANTY
This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and
workmanship under normal use and service for a period of five years from the date of purchase, when
operated and maintained in accordance with Clarke's Maintenance and Operations Instructions.
This warranty is extended only to the original purchaser for use of the product. It does not cover
normal wear parts such as electrical cable, rubber parts and motor brushes.
Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts
and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL
DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO
WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY, SHALL BE
IMPLIED. A warranty registration card is provided with your Clarke floor machine. Return the card to
assist Clarke in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: (a) Contact the nearest authorized Clarke repair
location or contact the Clarke Service Operations Department, 2100 Highway 265, Springdale, AR
72764, for the nearest authorized Clarke repair location. Only these locations are authorized to make
repairs to the product under this warranty. (b) Return the product to the nearest Clarke repair location.
Transportation charges to and from the repair location must be prepaid by the purchaser. Clarke will
repair the product and/or replace any defective parts without charge within a reasonable time after
receipt of the product.
Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
2100 Highway 265
Springdale, Arkansas, 72764
Clarke reserves the right to make changes or improvements
to its machine without notice.
Always use genuine Clarke Parts for repair.