Filter
Top Products
Reposition the staple chamber
for insertion of the connecting
pin. (Fig. 7).
Replace the staples and feeder
strip as indicated in the loading
instructions section.
Chamber Cleaning
Instructions for Model
6100 (Fig. 8)
Remove the feeder strip as
indicated in the loading
instruction section.
Remove all staples.
Remove screw and nut from hole
A. (Fig. 8)
Pull down entire inside frame for
complete cleaning. (Fig 8).
Operating Instructions for
model # 6000, 6100, 6200
Hold the hammer tacker in the hand
as you would a conventional hammer.
Select the area to be stapled and bring
the tacker down in a hammer striking
motion. The imapct of the hammer
tacker on the stapling surface will fire a
staple and move the next staple
forward into firing position. Simply
repeat the procedure for additional
stapling.
Storing Your Cobra
™
Hammer Tacker
When finished using your Cobra
™
hammer tacker, unload any
remaining staples.
Store in a dry place, out of the
reach of children.
WARNING:
NEVER POINT HAMMER
TACKER AT ANYONE. TO
MINIMIZE THE RISK OF
INJURY, ALWAYS WEAR
GLOVES AND USE EYE
PROTECTION
Warranty
30 Day Satisfaction Guarantee: If for
any reason you are not completely
satisfied with your Cobra
™
Hammer
Tacker simply return it to the place of
purchase (if a participating retailer)
within 30 days for a full refund.
2-Year Warranty: PowerShot Tool
Company warrants this product from
any defects due to faulty material or
workmanship for a period of 2 years
from purchase date. Please return,
transportation pre-paid, to the seller (if
a participating retailer) for free repair or
replacement (proof of purchase required).
4
See our website for
warranty information at
www.PowerShot-Tool.com