Filter
Top Products
SPECIAL FEATURES
Auto Stop
When the end of the tape is reached while playing or
recording, the motor is switched off and the buttons released.
This feature does not work for “Rewind” or “Fast Forward”,
and the Stop Button must be pressed when the cassette
spools (visible through the window) stop turning.
Automatic Level Control (ALC)
This unit has built-in ALC circuitry, which automatically adjusts
the optimum recording level.
MAINTENANCE & CARE
1. Check your batteries regularly, old or dead batteries should
be replaced. If the unit is not going to be used for a long
time or is being run exclusively on AC power, remove the
batteries to avoid leakage and damage.
2. Electronic products of this kind should never be subjected
to extreme temperatures or high humidity to ensure normal
functioning and a long life-time. For instance, this set
should not be placed in bathing areas, nor close to stoves
and radiators.
3. If necessary, clean the unit with a piece of cloth dampened
with water only. (Be sure the AC Power Cord is
disconnected from the outlet.) Never use a polish nor a
strong detergent as this will damage the finish of the
cabinet.
4. The heads and capstan are in constant contact with the
moving tape. If dirt or dust adheres to them, deterioration
of performance, such as sound decrease, distortion or
fluctuation will result. Use a small cotton bud with alcohol
or special tape head cleaner to clean these parts. Never
touch the heads with anything Metallic.
Prop. 65 Warning: Handling the coated electrical wires of this product exposes
you to lead, a chemical known to the State of California to cause cancer, birth
defects and other reproductive harm. Wash hands after use.
7
General Operation
Play/Pause Button
Press once to start playback. The
indicator on the right will turn on.
Press again to stop playing the disc
temporarily. The indicator on the right
will flash. Press once more to resume
PLAY
ONE
REPEAT
PAUSE
ALL
6
playback.
Stop Button
Press to stop playback. The total number of tracks will be
shown.
Next/Fast Forward Button
Press and release to go to the next track. Press and hold to
fast forward the current track.
Previous/Fast Backward Button
Press and release to go back to the beginning of the current
track. Press twice to go back to the previous track. Press
and hold to fast backward the current track.
Repeat 1
Press the Repeat Button once, the track number shown will
be repeated. The indicator on the left will flash.
Repeat All
Press the Repeat Button twice, all tracks will be repeated. The
indicator on the left will turn on. Press again to resume
normal playback. The indicator on the left will turn off.
Program Button
In the stop mode, press the Program Button, the track
number on the display will flash. Use the Next/Previous
Buttons to choose the tracks you wish to program, then press
the Program Button again to finish the first track
programming.
Repeat the above steps to program more tracks. Maximum of
20 tracks can be programmed. Press the Play Button to start,
the tracks will play in the programmed order.
To clear the program memory, press the Stop Button.