Filter
Top Products
FOROPERATORSAFETY,keepfingersandaliforeign
objectsoutoftheintakeports,Therotatingfaninside
theMowerhousingisaccessibiethroughtheintake
portsandishazardous,Donotwearboseciothingor
jeweiry,Makecertainthateachintakeportwhichisnot
beingusedorattachedto a dustcollectionsystemis
coveredwithan intakeportcap,
CONNECTING TOOL TO
POWER SOURCE
A separate eHectrbaHcircuit shouid be used for your
toois, This circuit shouid not be Hessthan #14 A. W, G,
wire and shouid be protected with a 15-amp time Hag
fuse, Have a qualified electrbian repair or repiace dam-
aged or worn cord immediateiy, Before connecting the
motor to the power iine, make certain the switch is in
the "OFF" position and be sure that the electric current
is of the same characteristics as stamped on the motor
namepiate, AHHiine connections shouid make good con-
tact, Running on Howvoitage wili damage the motor,
LOCKING SWITCH JN THE
"OFF" POSiTiON
When the Dust Collector is not in use, the switch key
(B) shouid be removed so that it cannot be started,
Grasp the switch key and puli it out of the switch
assembiy, With the switch key removed, the switch
wili not operate, However, shouid the switch key be
removed while the dust collector is running, it can be
turned "OFF", but cannot be restarted without inserting
the switch key, See figure 18,
TRANSPORTATION AND STORAGE
MAKE CERTAmN THE DUST COLLECTOR ms
DmSCONNECTED FROM THE POWER SOURCE.
Fig. 19
DO NOT EXPOSE THE DUST COLLECTOR TO RAIN
OR OPERATE THE MACHINE IN DAMP LOCATIONS.
ON/OFF SWITCH
Fig. 18
/
A
\
The ON/OFF switch assembiy is iocated on the side of
the motor, To turn the dust collector "ON", move the
switch (A) up to the "ON" position, To turn the dust
collector "OFF", move the same switch down to the
"OFF" position, See figure 18,
__'_" A
1. The dust collector features a convenient carG,ing
handle with rubber grip (A). Bee figure 19.
Fig. 20
2. in addition to the carrying handle, the dust collector
features storage mounting hob (B). Bee figure 20.
IMPORTANT: The dust collector weighs approximately
46 Ibs. Care should be taken when lifting and transport-
ing dust collector. Remove collection bag before lifting
to reduce tripping hazard.
14