Filter
Top Products
SERVICE
/_ WARNING: Preventive maintenance performed by unauthorized I
personnel may result in misplacing of internal wires and components,
I
which could cause a serious hazard.
1. Tool service MUST BE performed only by a Sears Service Center.
Service or maintenance performed by unqualified personnel could result
in a risk of injury.
IMPORTANT NOTE: All service that requires opening the saw should only be
performed at a Sears Service Center.
2. When servicing a tool, ALWAYS use only identical replacement parts. Follow
instructions in the Maintenance Section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions may create a risk of electric
shock or injury.
TOOL LUBRICATION
Your CRAFTSMAN Reciprocating Saw has been properly lubricated
and is ready to use.
1. In two to six months, depending on use, take your tool to the nearest Sears
Service Center for a complete cleaning, inspection and lubrication.
2. Tools used constantly on production jobs will need lubrication more often.
3. Tools that haven't been used for long periods of time should
be lubricated before you use them.
WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS
I/_ WARNING: To avoid accidents, ALWAYS disconnect the I
I
tool from the power source BEFORE cleaning or performing any
I
maintenance.
1. Only the parts shown on pages 14-16 are intended to be repaired or
replaced by the customer. All other parts represent an important part of the
double insulation system and should only serviced at a Sears Service Center.
12