Filter
Top Products
WARNING: Always wear safetygoggles or safety
glasseswith side shieldswhen operatingyour
sander. Failure to do socould resultin dust,
shavings, loose particlesor foraign objects being
throwninto your eyes, causing possible serious
injury.
KNOW YOUR SANDER
See Figure 1.
Before attemptingto use your sender, familiarizeyourself
withall operatingfeatures and safety requirements.
Your sender is suitable for sanding with coarse, medium,
andfine grit sanding discs.
WARNING: If any partsare missing,do not
operate this tool untilthe missingparts are
replaced. Failure to do so couldresult in possible
seriouspersonal injury.
ELECTRICAL CONNECTION
Your sander has a precisionbuiltelectric motor,it should
be connectedto a power supply that is 120 volts, 60Hz,
AC only (nonmal household eunmnt), Do notoperate
thistool on directcurrent(DC). A voltage dropof more
than 10 percentwill cause a lossof powerand the motor
will overheat. If your tool does notoperatewhen plugged
intoan outlet,double-checkthe powersupply.
WARNING: Do notallow familiaritywithyour
sender to make you careless. Rememberthat a
carelessfraction of a second is sufficientto inflict
severeinjury.
SWITCHACTUATOR
(BLACK)
AtI'XlI.I_H
HANDLE
BACK-UPDISC
BACK-UPPAD
Fig, 1