Filter
Top Products
SWITCH
See Figure 2,
To turn your drill ON, depress the switch trigger. To turn it
OFF, release the switch trigger.
FORWARD/REVERSE/CENTERLOCK
SELECTOR
TO INSTALL BATTERY PACK
• Lock switch trigger on this drill by placing the direction
of rotation se{ector in center position. See Figure 4.
• Place battery pack in this drill Align raised rib on
battery pack with groove inside drill. See Figure 3.
VARIABLESPEED
SWITCHTRIGGER Fig. 2
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed and torque w{th increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.
Note: You might hear a whist{ing or ringing noise from the
switch during use. Do not be concerned, th{s is a normal
part of the switch function.
BATTERYPACK
LATCHES
\
DEPRESSLATCHESTO
RELEASEBATTERYPACK Fig. 3
• Make sure the latches on each s{de of your battery
pack snap {n place and battery pack is secured {ndrill
before beginning operation.
CAUTION: When placing battery pack in your drill,
be sure raised rib on battery pack aligns with groove
inside drill and latches snap into place properly.
Improper assembly of battery pack can cause
damage to internal components.
TO REMOVE BATTERY PACK
• Lock sw{tch trigger on your dr{ll by p}ac{ng the direct{on
of rotation se{ector {ncenter position. See Figure 4.
• Locate latches on side of battery pack and depress to
release battery pack from your drill See Figure 3.
• Remove battery pack from your dr{ll.
11