Filter
Top Products
PRODUCT SPECIFICATIONS
DRILL-DRIVER 315,115200 315.115210
Chuck 3/8 in. Keyless 3/8 in. Keyiess
Motor 13.2 Volts 15.6 Volts
Gear Train One Speed One Speed
Switch Variable Speed VariabJe Speed
No Load Speed 0-600imin 0-600/rain
Battery 130139018 130139015
Maximum Torque 100 in.lb. 110 in.lb.
Charger 140287001 140250013
Rating 120 V, 60 Hz,AC only 120 V, 60 Hz,AC only
Charge Rate 3-6 Hour 3-6 Hour
Clutch 24 Positions 24 Positions
KNOW THIS TOOL
See Figure 1,
Before attempting to use this tool, familiarize
yourself with all operating features and safety
requirements.
KEYLESS CHUCK
This tool has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck iaws.
SWITCH
To turn this tool ON, depress the switch trigger. Release
switch trigger to turn your drill-driver OFF.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
This tool has a forward/reverse selector located above the
switch trigger.
WRIST STRAP
A wrist strap is provided to reduce the chances of drop-
ping your tool. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bit(s) provided with this tool can be
placed in the storage area located on the top of the motor
housing.
_ WARNING: If any parts are missing, do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
iniury.
8