Craftsman 315.11534 Cordless Drill User Manual


 
WARNING!READANDUNDERSTANDALLIN-
STRUCTIONS. Failureto followall instructions§sted
belowmay result in electric shock, ('ireand/or sadous
personsi intury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keepyourwork ares clean sndwsll lit. Cluttered
benches and dark areas invite accidents`
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
ulde, gases, or dust. Power tools createsparkswhich
may igNte the dust or fumes.
Keep bystanders, children, andvisitora awaywhile
operating a power tool. DislTactionscan cause you to
lose contm[.
ELECTRICAL SAFETY
A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery, A chargerthat
may be suitablefor one type of batterymay create a
risk offirs when used with another battery.
Use battery operated tool onlywlth epeclficaliy des-
ignated battery pack. Use of anyother batteriesmay
create a riskof fire.
Use battery only with charger listed.
MODEL
315.115340
BATTERYPACK CHARGER
130139017 140302002
ItemNo, P.11057 Item No._.1_055
315.115350 130139014 140302003
Item No, _.11007 Item No..9.11006
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord sway fl'om heat, oil, sharp
edges, or moving parts. Replace damaged cords
immediately, Damaged cordsmay create e fire.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating power tool. Do not
Use tool while f_redor under the Influence of drugs,
alcohol, or medication, A moment ofinattentionwhile
operatingpowertools may resultin seriouspersonal
iniury.
Dress properly. Do notwesr loose clothing or
jewelry. Contain long hair. Keep your heir, clothing,
end gloves away from moving parts. Looseclothes,
jewelry, or longhaircan be caughtinmovingparts.
Avoid accidental starting. Be sure switch Is in the
looked or off position before inserting battery pack,
Carrying tools with yourfinger onthe switchor insert-
ingthe battery pack into a too[with the switch on
invitesaccidentS.
Remove adjusting keys or wrenches before turning
the tool on. A wrench or a keythat {sleftattached to a
rotating part ofthe tool may resultin personal in{ury.
Do not overreach. Keep proper footing and balance
at all 5rues. Properfoo_ng and ba_nce enablebe_er
cOnLTO[ofthe toolin unexpected situations.
Use safety equipment. Nwaye wear eye protection.
Dust mask, non-skidsafety shoes,hardhat, or hearing
protectionmust be usedfor appropriate conditions.
Do notwear loose clothing or jewelry. Contain long
hair. Looseclothes,jewelry,or long haircan be drawn
intoah"vents.
Do not use on a ladder or unstable support. Stable
tootingon a solid surface scabies better controlof the
too[in unexpectedsituatbns.
TOOL USE AND CARE
Use damps or other pracfieal way to secure and
support the workplece to • stable platform. Holding
the work by handor against your body is uns_ble and
may leadto Tossof con_'ol.
Do not force tool. Use the correct tool for your ap-
plication. The correcttoo[will do the job better and
safer atthe rate forwhich itis designed.
Do sot use tool if switch does not turn it on or off.
A toolthat cannot be controlled with the switch is dan-
gerousand must be repaired.
Disconnect battery pack from tool or place the
=witch in the locked or off position before making
any adjustments, changing accessories, or storing
the tool. Such preventivesat'elymeasures reduce the
riskorst_'t_ngthetoo(aucident_iy.
Store idle tools out of reach of ch|ldren and other
untrained persons. TooLsaredangerous inthe hands
of untrainedusers.
When battery pack is not Jnuse, keep it away from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make connection from one terminal to another.
Shordngthe batteryterminals together may cause
sparks, bums, ora fire.
Maintain tools with care. Keep cutting tools sharp
and clean. Properlymaintainedtoolswithsharp cut-
tingedges are less likely to bind and are easierto
control
Check for mlsallgnment or binding of moving parts,
breakage of parts, and any other condition that
may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are
caused by poorlymaintained tools.
Use onlyaccessories that ere recommended by the
manufacturer for your model. Accessories that may
be sui_=blefor one too{ may create a risk of injurywhen
used on anothertoo[.
Keep the tool end its handle dry, clean and free
from oiland grease, Alwaysusea clean clothwhen
cleaning.Never use brake _uJds,gasoline,petrcleum-
based r_oducts,orany strongsolvents to oJeanyour
tool. Followingthis rule willreduce the risk of lossof
con_'oland deteriorationofthe enclosureplastic.
3