Filter
Top Products
SWITCHLOCK
SeeFigure2.
TheswitchtriggercanbelockedintheOFFposition.
Thisfeaturecanbe usedto preventthepossibilityof
accidentalstartingwhennotin use.Tolockswitch
trigger,placethedirectionof rotationselectorin
centerposition.
_. WARNING:Batterytoolsarealwaysinoperating
condition.Therefore,switchshouldalwaysbelocked
whennotinuseor carryingatyourside.
REVERSIBLE
SeeFigure3.
This tool has the featureof being reversible.The
directionof rotationiscontrolledbya selectorlocated
abovetheswitchtrigger.Withthedrill heldin normal
operatingposition,the directionof rotationselector
shouldbepositionedtotheleftoftheswitchfordrilling.
Thedrillingdirectionisreversedwhentheselectoristo
the rightof the switch.Whentheselectoris in center
position,theswitchtriggeris locked.
CENTERPOSITION
(LOCK)
SELECTOR
REVERSE
[]
BATTERYPACK
LATCHES
DEPRESSLATCHESTO
RELEASEBATTERYPACK
Fig. 4
Make sure the latches on each side of your battery
pack snap in place and battery pack is secured in
drill before beginning operation.
SWITCH '_
TRIGGER FORWARD
Fig. 3
CAUTION: To prevent gear damage, always allow
chuck to come to a complete stop before changing the
direction of rotation.
To stop, release switch trigger and allow the chuck to
come to a complete stop.
TO INSTALL BATTERY PACK
See Figure 4.
[] Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
[] Place battery pack in your drill. Align raised rib
inside drill with groove on battery pack.
See Figure 4.
CAUTION: When placing battery pack in your drill,
be sure raised rib inside drill aligns with groove on
battery pack and latches snap into place properly.
Improper assembly of battery pack can cause
damage to internal components.
TO
[]
REMOVE BATTERY PACK
Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
[] Locate latches on end of battery pack and
depress to release battery pack from your drill.
See Figure 4.
[] Remove battery pack from your drill.
10