Filter
Top Products
SPECIFICATIONS
Chuck Capacity
Motor
Charger Rating
No Load Speed
3/8 in.
14.4 Volts DC
120 Volts, 60 HZ, AC Only
0 - 600/min.
Switch
Charge Rate
Maximum Torque
Variable Speed - Reversible
3 - 6 Hours
100 in./Ib.
KNOW YOUR DRILL-DRIVER
See Figure 1.
Before attempting to use any tool, familiarize yourself
with all operating features and safety requirements.
d_::=_=_=__ SCREWDRIVER BITS
BATTERY PACK
BATTERY CHARGER
WRIST STRAP
See Figure 1.
A wrist strap is provided to reduce the chances of
dropping your drill-driver. Place one hand through the
wrist strap when carrying tool.
BIT LEVEL
STORAGE
BIT
STORAGE
KEYLESS
CHUCK
RED
CHARGING
STAND
SWITCH
TRIGGER
BATTERYPACK
SHOWNINTOOL
FORWARD
REVERSE
SELECTOR
A
WRISTSTRAP
Fig. 1
WARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to
do so could result in possible serious personal injury.
iNSTRUCTiONS
When unpacking the tool:
[] Carefully remove the tool and accessories from the
box.
[] Make sure that all items listed in the packing list are
included.
[] Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188 for assistance.