Dell X200 Battery Charger User Manual


 
Battery Charger 15
Removing the Battery From the
Battery Charger
NOTICE: When you disconnect the AC adapter from the battery charger, hold
the adapter cable connector, not the cable itself, and pull firmly but gently to
avoid damaging the cable.
1
Disconnect the AC adapter from the electrical outlet and the battery
charger.
2 Slide the battery charger lock latch to the unlock position.
3 Slide and hold the battery charger latch release, and then gently pull
the battery out of the battery charger connector.
4 Reinstall the battery in the computer:
a Slide the battery into the bay until the battery latch release clicks.
b Slide the battery lock latch into the lock position.
Storing a Battery
Remove any installed battery pack when you store your computer for an
extended period of time. A battery discharges during prolonged storage.
After a long storage period, recharge the battery fully before you run the
computer on battery power.
Specifications
Battery Charger
Dimensions:
Depth 35 mm (1.4 inches)
Height 15 mm (0.6 inch)
Width 212 mm (8.3 inches)
Weight (typical) 0.06 kg (0.13 lb)