Filter
Top Products
Figure 1. SC100/SC120 Expansion Enclosure Components
1. Documentation 2. Expansion enclosure
3. Rack rails 4. Front bezel
Installing the Expansion Enclosure in a Rack
Install the SC100/SC120 expansion enclosure in a rack.
NOTE: Mount the expansion enclosure in a manner that allows for expansion in the rack and
prevents the rack from becoming top‐heavy.
1. Assemble the rails following the safety instructions and the rack installation instructions provided
with your expansion enclosure.
2. Determine where to mount the expansion enclosure in the rack and mark the location.
3. Install the rack rails at the marked location using the top mounting holes of the bottom U.
a. Insert the top locking pin in the middle mounting hole of the top U.
b. Insert the bottom locking pin in the bottom mounting hole of the bottom U.
4. Mount the expansion enclosure chassis on the rails.
Figure 2. Mount the Expansion Enclosure Chassis in the Rack
1. SC100/SC120 expansion enclosure 2. Storage system
5. Secure the expansion enclosure chassis to the rack using the mounting bolts.
4