Delta 23-198 Grinder User Manual


 
EXTENSION CORDS
Use proper extension cords. Make
sure your extension cord is in good
condition and is a 3-wire extension cord which has
a 3-prong grounding type plug and matching
receptacle which will accept the machine’s plug.
When using an extension cord, be sure to use one
heavy enough to carry the current of the machine.
An undersized cord will cause a drop in line
voltage, resulting in loss of power and overheating.
The table shows the correct gauge to use
depending on the cord length. If in doubt, use the
next heavier gauge. The smaller the gauge number,
the heavier the cord.
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating
Volts Total Length
of Cord in
Feet
Gauge of Extension
Cord
0-6
0-6
0-6
0-6
120
120
120
120
up to 25
25-50
50-100
100-150
18 AWG
16 AWG
16 AWG
14 AWG
6-10
6-10
6-10
6-10
120
120
120
120
up to 25
25-50
50-100
100-150
18 AWG
16 AWG
14 AWG
12 AWG
10-12
10-12
10-12
10-12
120
120
120
120
up to 25
25-50
50-100
100-150
16 AWG
16 AWG
14 AWG
12 AWG
12-16
12-16
12-16
120
120
120
up to 25
25-50
14 AWG
12 AWG
GREATER THAN 50 FEET NOT RECOMMENDED
7
KEY FEATURES AND COMPONENTS
FIG. 1
(features start at the top and move
counterclockwise around tool)
A. Flexible work lamp
B. Wheel Guard
C. Aluminum oxide grinding wheel
D. Adjustable tool rest
E. On/Off switch with lock-out key
F. Variable speed control
G. Composite grinding wheel
H. Adjustable spark shield
I. On-board storage for included
wrench and dressing tool (not
shown)
FUNCTIONAL DESCRIPTION
The DELTA
®
23-198 is a 6 in. Variable Speed Grinder and the DELTA
®
23-199 is an 8 in. Variable Speed Grinder. They
offer superior performance in grinding and sharpening operations and, with the proper accessories, allow the user
to remove rust and buff or polish metal. This model comes with a flexible lamp, adjustable tool rests, quick release
arbor nut system, and two large eye shields for added safety.