Filter
Top Products
4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the carton. Remove the protective coating from all unpainted parts.
This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline, or lacquer
thinner for this purpose).
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE TOOL TO THE POWER SOURCE UNTIL THE
MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTAND THE ENTIRE
INSTRUCTION MANUAL.
Fig.1
1. Grinder
2. Right side tool rest with V-groove
3. Left side tool rest
4. Eye shield (2)
5. Eye shield bushing (2)
6. Eye shield bolt (2)
7. Eye shield knob (2)
8. Left side spark guard
9. 5/16-18x5/8" Hex head screw (2)
10. 3/4" Flat washer (4)
11. 5/16-18x1/2" Hex head screw (2)
12. 1/4-20x1/4" Hex head screw (2)
13. 11/16" Flat washer (4)
14. Wrench
15. Right side spark guard
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15