Filter
Top Products
8
INSTALLING OR REMOVING BATTERY PACK
TO INSTALL BATTERY PACK: Align
rails (A) Fig. 4, on battery pack with
slots on tool and push battery pack
onto tool until it locks in place.
TO REMOVE BATTERY PACK:
Depress the battery release button
(B) Fig. 4, and pull battery pack out of
tool.
Fig. 4
ASSEMBLY
BLADE INSTALLATION
1. Raise the blade guard (A) Fig. 5
by lifting up on tab (B).
2. Depress button (C) Fig. 6, and
gently squeeze the switch trigger (D)
until the blade shaft moves slowly
and stop the motor when the blade
shaft is at or near the bottom of its
stroke as shown in Fig. 7.
3. REMOVE BAT-
TERY PACK.
Fig. 5
Fig. 6
4. Loosen the two screws (F) Fig. 7
on the blade shaft.
Fig. 7
A
B
A
B
C
D
F