Filter
Top Products
5
10” Tilting Arbor Saw
SPECIFICATIONS
High quality and feature loaded.
•
Magnetic motor starter with thermal
overload and no-voltage protection.
•
Full cabinet with motor cover
for sawdust containment.
•
Built-in storage for miter
gage, rip fence and blade
wrench.
•
Extra-large cast-iron table with
extension wings provides ample
support for large work.
•
Integral T-slot grooves prevent
miter gage from falling during wide
cut-off operations.
•
Convenient up-front blade raising and
tilting controls for safe, easy operation.
Model 36-755 10Ó Tilting Arbor Saw.
Includes basic machine with Jet-Lock
®
,
Micro-Set
®
rip fence; see-thru blade guard,
splitter and anti-kickback attachment; front
graduated guide bar, rear guide bar, miter
gage, 10Ó dia. saw blade, table insert, arbor
and motor pulleys, V-belt, (2) table extension
wings, motor cover; 2HP, 230V, single phase,
60 Hz., TEFC motor; motor starter and
instruction manual.
Model 36-751 10Ó Tilting Arbor Saw with 30Ó Unifence
®
Saw Guide. Same as Model 36-755 above less Jet-Lock
®
,
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
®
Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs and mounting hardware. Less table board.
Model 36-752 10Ó Tilting Arbor Saw with 52Ó Unifence
®
Saw Guide. Same as Model 36-755 above less Jet-Lock
®
,
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
®
Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs, shelf support brackets and mounting hardware.
Less table and shelf boards.
Cuts stock 3
1
⁄8Ó thick; a full
2
1
⁄8Ó at 45° blade tilt. 2 HP
motor delivers plenty of power
for fast, efficient cutting.
Unique “table top located”
adjusting screws for accurate
setting of 45° and 90° positive
blade stops.
Motor ........................................... 2 HP, 230V, 60 Hz., single phase
Blade:
Diameter .................................................................... 10Ó (254 mm)
Arbor .............................................................................
5
⁄8Ó (16 mm)
Speed ............................................................................... 4000 rpm
Capacity:
Max. depth of cut 90° ................................................. 3
1
⁄8Ó (79 mm)
Max. depth of cut 45° ................................................. 2
1
⁄8Ó (54 mm)
Max. rip R of blade .................................................... 25Ó (635 mm)
Max. rip L of blade .................................................. 15
1
⁄2Ó (394 mm)
Max. rip R of blade w/30Ó Unifence Saw Guide ........ 30Ó (762 mm)
Max. rip R of blade w/52Ó Unifence Saw Guide ...... 52Ó (1321 mm)
Max. rip L of blade w/30Ó or
52Ó Unifence Saw Guide ....................................... 8
3
⁄4Ó (222 mm)
Table in front of saw blade at
max. cutting height .............................................. 12
1
⁄4Ó (311 mm)
Max. width of dado .....................................................
13
⁄16Ó (21 mm)
Table:
Size w/extension wings .......................... 36Ó x 27Ó (914 x 686 mm)
Size w/ext. wing and 30Ó
Unifence Saw Guide ...................... 62
1
⁄2Ó x 27Ó (1588 x 686 mm)
Size w/ext. wing and 52Ó
Unifence Saw Guide ...................... 78
1
⁄2Ó x 27Ó (1994 x 686 mm)
Height ...................................................................... 34
1
⁄4" (870 mm)
Miter gage groove ........................................
3
⁄8Ó x
3
⁄4Ó (10 x 19 mm)
Overall Dimensions:
Width ....................................................................... 45Ó (1143 mm)
Width w/30Ó Unifence Saw Guide ........................ 67
1
⁄2Ó (1715 mm)
Width w/52Ó Unifence Saw Guide ........................... 83Ó (2108 mm)
Depth ......................................................................... 32Ó (813 mm)
Height ........................................................................ 39Ó (991 mm)
Weight: Model 36-755 ......................................... 288 Ibs. (131 kg)
Model 36-751 ......................................... 290 Ibs. (132 kg)
Model 36-752 ......................................... 293 Ibs. (133 kg)
Model 36-755 10Ó Tilting Arbor Saw
Model 36-752 10Ó Tilting Arbor Saw
with 52Ó Unifence Saw Guide
and 34-998 Accessory Table and
Shelf Boards.
Model 36-751 10Ó Tilting Arbor Saw
with 30Ó Unifence Saw Guide and
34-914 Accessory Table Board.
For accessories, see page 27
®