Filter
Top Products
No. 34-914 Table Board.
For 36-905 Unifence. With laminate coating.
Size 27Ó x 32Ó.
No. 34-998 Table and Shelf Boards.
For use with 36-906 52Ó Unifence.
27Ó x 48Ó. Laminated.
No. 36-624 Table Board.
For use with No. 36-905 30Ó Unifence.
27Ó x 32Ó Medium density fiberboard.
No. 34-878 Cut-Off Fence.
10
1
Ú2Ó long for repetitive cut-off work.
No. 36-625 Table Board and Shelf.
For use with No. 36-924 50Ó Precision
Saw Guide. Large 27Ó x 48Ó table.
No. 36-907 52Ó Unifence Rail.
No. 36-908 52Ó Unifence Less Rail.
No. 36-925 Table Board.
For use with No. 36-921
29Ó Precision Saw Guide.
Measures 27Ó x 30Ó.
No. 36-926 Fence Leg Assembly.
Provides extra support for No. 36-925 table.
No. 78-951 Adjustable Steel Support
Legs. Provides extra support for
extension table. White.
No. 78-952 Adjustable Steel Support
Legs. Same as above, except in gray.
No. 78-929 Right Extension Table. For use
with No. 78-930 and 79-010 Biesemeyer
28Ó T-Square
®
Home Shop Fence Systems.
27Ó x 22Ó. White.
No. 43-349 Single Cast Iron Extension
Wing. Single solid cast iron extension wing
measures 27˝ x 8˝. Attaches to either side of
table.
No. 34-545 Cast Iron Extension Wing Pair.
A set of two solid cast iron extension wings.
Each wing measures 27˝ x 8˝.
•
Fixed splitter maintains correct alignment with saw blade
at all times. Tilts with saw arbor for angle cutting.
•
Removable splitter for non-thru cutting; permits
cut-through operations without removal.
•
Clear see-through Lexan
®
split basket shields.
No. 34-976 Uniguard
®
Blade Guard. With splitter and anti-kickback
fingers. Includes table mounting bracket, support arm with extension,
basket arms, Lexan
®
shields, switch support arm, lamp mounting
bracket, storage basket and push stick and instruction manual.
No. 78-953 Uniguard Strap Kit. Kit replaces the rear angle rail of
Biesemeyer 30˝ and 50˝ Commercial Fence Systems and Home
Shop Fence Systems up to 52˝ for mounting the Delta Uniguard
Blade Guard. Mounting hardware included.
•
Permits cut-through operations without removal.
•
Ceiling mounted and floor mounted models also available.
NOTE: For fence systems over 62˝, BladeGuard systems may be custom
ordered. Call Biesemeyer Manufacturing toll-free at 1-800-782-1831 for the
dealer nearest you.
No. 78-960 Biesemeyer T-Square
®
BladeGuard System.
With T-arm assembly, blade guard, splitter, installation bracket,
mounting hardware and instruction manual.
No. 78-955 Biesemeyer T-Square
®
BladeGuard System.
Same as 78-960 except for fence systems 40˝ and under.
No. 78-954 Biesemeyer Plate for Unifence.
Allows you to mount the Biesemeyer No. 78-955 or 78-960
BladeGuard System to either the Delta 30˝ or 52˝ Unifence.
Plate is designed to fit newer square table support legs only.
No. 78-966 Biesemeyer Dust Collection Kit. Use with 78-960 or
78-955 Biesemeyer T-Square systems to provide dust collection
capability to tablesaws. Clear Lexan provides the operator with a
view of the entire work area from all angles.
32
No. 34-976 Uniguard
®
Blade
Guard. Fits Delta 10Ó Tilting
Arbor Saw (shown), Delta
Unisaw and Delta 10Ó
Contractor’s Saws with 30Ó or
52” Unifence Saw Guide or just
about any other table saw.
Deluxe Uniguard
®
Blade Guard System
With Splitter and Anti-Kickback Fingers
Biesemeyer T-Square
®
Table Saw BladeGuard System
No. 78-960 Biesemeyer
T-Square
®
BladeGuard
System. Compatible with
Biesemeyer 50L12
Nos. 78-900,
78-904, 78-935
and 79-016 saw fence
systems. Fits fence
systems 40˝ to 62˝.
For 10Ó Circular Saws
For 10Ó Tilting Arbor Saw
For 10Ó Contractor’s Saw
®
,
10Ó Contractor’s Saw
®
II &
10Ó Tilting Arbor Saw
No. 34-555 Sliding Table Attachment.
Increases the job capacity of Delta Unisaws,
10Ó Tilting Arbor Saws, 10Ó Contractor's Saws
and Heavy Duty Wood Shaper. Handles stock
up to 25
1
/2Ó wide with the fence at 90°; 28Ó
wide with the fence at 45° and 36" wide when
fence is placed at the rear of the machine.
Includes adjustable stock stop. 78 lbs.
No. 50-302 Outfeed Table. Two-piece laminat-
ed table provides added support for maintain-
ing proper stock alignment and preventing
material shifting and tipping. Includes 31Ó x 34Ó
folding table and outboard leg that fold out of
the way when not in use. Fits Delta Unisaw
®
Tilting Arbor Saws and may be easily adapted
to fit most other comparable cabinet-type table
saws. Mounting hardware included.
No. 34-171 Spacer Collars. Set of two:
1
/4Ó
and
3
/8Ó widths with
5
/8Ó arbor hole. For spac-
ing-saw blades to cut tenons in one pass. 1 Ib.
No. 78-962 Biesemeyer T-Square
®
Anti-
Kickback Snap-In Spreader. Complete with
spring-loaded anti-kickback fingers. 6 lbs.
† No. 50-278 Mobile Base. Adds roll-away
portability to 10Ó Tilting Arbor Saw.
† NOTE:For 10˝ Tilting Arbor saw equipped with 52˝
Unifence Saw Guide, also order No.50-284 Mobile
Base Extension. For saws equipped with 30˝ Unifence Saw
Guide, also order No. 50-285 Base Extension
No. 34-779 Miter Gage. For straight and angle
work. Has
3
/8Ó x
3
/4Ó x 18Ó guide bar. Adjustable
positive stops at 90° and 45° positions.
Accommodates No. 34-568 Clamp Attachment.
No. 34-895 Auto-Set
®
Miter Gage. For
straight and angle operations. Has
3
/8Ó x
3
/4Ó x
18Ó guide bar and pivoting work support with
pointer and calibrations reading through 120°
swing. Adjustable, positive stops at 90° and
45° positions. Accommodates No. 34-568
Clamp Attachment. 3
1
/2 Ibs.
No. 34-568 Clamp Attachment for Miter
Gage. Holds work securely for accurate miter
and cut-off operations. Complete with clamp
bar, front and rear posts and two sliding clamp
screws and blocks. For use with No. 34-895
Miter Gage. 1
1
/2 Ibs.
No. 34-873 Extra Clamp Screw and Block
Only. For use with No. 34-568 Clamp
Attachment
1
/2 Ib.