Filter
Top Products
13
Deluxe Sawbuck
®
Frame and Trim Saw
SPECIFICATIONS
Try it once and you won’t be
able to get along without it.
•
Perfect for crosscuts up to 16Ó at 90°,
12Ó at 45° on hard and soft woods, vinyl
and aluminum siding.
•
Saw head miters and tilts for angle and
compound cutting operations.
•
Large 29
13
⁄16Ó miter scale has
1
⁄4Ó between
degree markings for easy reading with
positive stops at 0°, 22
1
⁄2° and 45° R and L
including a special 31.62° position for cut-
ting crown mouldings.
•
Exclusive SMC construction eliminates
table rust and corrosion; steel guide bars
are Nitrotec™ treated for rust-free,
smooth gliding operation.
•
Powerful 15 amp. gear driven motor
features an electric brake that
automatically stops blade in seconds
after the switch trigger is released.
Model 33-055 Deluxe Sawbuck
®
Frame and Trim Saw. Includes
basic machine with 15 amp., 115V,
25-60 Hz., AC motor with electric
automatic brake, 6 foot cord, leg
set, blade guard with retractable
leaf guard, 8Ó diameter crosscut
saw blade, blade wrench and
instruction manual.
Table is made of an entirely new reinforced polyester resin
compound that prevents warping, springing and rusting. Cutting
head is supported at both ends by corrosion-proof steel guide rails.
Set-up is simple and fast.
Table rotates with track arm for
mitering. Motor tilts around
common table-level pivot point
for beveling.
Deluxe Sawbuck accommo-
dates accessory 6Ó diameter
stackable type dado head to
cut grooves up to
13
⁄16Ó wide.
Motor ............................................... 15 amp., 115V, 25-60 Hz., AC
Brake .................................................................. Electric, automatic
Blade:
Diameter ...................................................................... 8Ó (203 mm)
Arbor .............................................................................
5
⁄8Ó (16 mm)
Speed ............................................................................... 5500 rpm
Capacity:
Cut-Off at 90° ............................................................ 16Ó (406 mm)
Cut-Off at 45° ............................................................ 12Ó (305 mm)
Depth of cut at 90° ..................................................... 2
3
⁄4Ó (70 mm)
Depth of cut at 45° ..................................................... 1
3
⁄4Ó (44 mm)
Dado .......................................................
13
⁄16Ó (21 mm) Width using
6Ó Diameter Stackable Type
Cutting Head Height Adj. ................................ 1
1
⁄4Ó (32 mm) max.
Table:
Diameter of cutting surface .................................... 28
1
⁄2Ó (724 mm)
Extension on both sides of table ............................ 11
3
⁄4Ó (298 mm)
Overall length .......................................................... 52Ó (1321 mm)
Height ..................................................................... 35
1
⁄4Ó (895 mm)
Fences .............................................. 23Ó (584 mm) R & L of Blade
Positive Stops:
Miter ............................................... 0°, 22
1
⁄2°, 31.62° & 45° R & L
Overall Dimensions ........................................... 37Ó x 67
1
⁄2Ó x 47Ó
(940 x 1715 x 1194 mm)
Weight ...................................................................... 96 Ibs. (44 kg)
For accessories, see page 29
Model 33-055
Deluxe Sawbuck
®
Frame and Trim Saw
Special 31.62° miter stop and
33.85° bevel setting facilitates
compound cutting standard
52°/38° crown moulding.