Filter
Top Products
4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
Fig. 2
Fig. 3
Fig. 2
1 - Swivel Casters (4)
2 - Base
3 - “U” Brackets For
Filter Bag Support
Rods (2)
4 - Left-Hand Drum
5 - Dust Chute
6 - Right-Hand Drum
7 - Eight-Hole Rubber
Gaskets (2)
8 - Ten-Hole Rubber
Gasket
Fig. 3
9 - Dust Collection
Bags (2)
10 - Filter Bags (2)
11 - Drum Supports (4)
12 - Blower and Motor
Assembly
13 - Intake Ports
14 - Intake Port
Caps (4)
15 - Support Rods (2)
16 - Support Rod
Extensions (2)
17 - Bag Locking
Bands (4)
18 -Lower Dust Bag
retaining Clips (8)
Hardware (*not shown)
* - 5/16 - 18 x 5/8 hex head screws (66)
* - 5/16 lockwashers (66)
* - 5/16 - 18 hex head nuts (12)
* - M4 x 12 sheet metal screws (4)
* - 5/16 x 15/16 O.D. flat washers (16)
* -1/4-20x5/8" Hex Head Screws (16)
* -1/4" Lockwashers (16)
* -1/4"-20 Hex Nuts (16)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18