Filter
Top Products
5
101647 www.desatech.com
Extension Cords
CAUTION: Use only three-prong, grounded extension cords
marked for outdoor use.
1. Move trigger lock to the OFF position. See
Product Identification
on page
4 to locate trigger lock.
2. Unplug tool.
3. Remove nail pusher from nail chamber. Access nail pusher at rear of nail
chamber. Push end of nail pusher in and down to release it (see Figure 2).
Pull nail pusher from nail chamber (see Figure 3).
Loading Tool
WARNING: Never load tool while it is plugged in. Accidental
discharge may occur. Before loading, move trigger lock to the OFF
position and unplug tool.
Figure 3
Be sure to use the right size extension cord. If cord size is wrong, tool may be
damaged. Tool performance may also be affected. Use only a three-prong,
grounded extension cord.
Extension Cord Size Requirement
1 to 12 feet, use 16 AWG rated cord
12 to 50 feet, use 14 AWG rated cord
Inspect extension cord often. Replace cord if worn or damaged.
Figure 2
Nail Pusher
2
1
Nail Pusher