Filter
Top Products
7
101647 www.desatech.com
Figure 7
5. Place palm of free hand firmly on
head of tool (see Figure 7).
6. Squeeze trigger to fire.
7.
IMPORTANT:
Do not repeatedly
fire this tool when empty of nails.
This may damage tool.
WARNING: Do not alter this tool in any way. Only use accessories
designed for this tool.
Maintenance
WARNING: Never perform steps listed below while tool is plugged
in. Accidental discharge may occur. Move trigger lock to the OFF
position and unplug tool.
Tool Jam
1. If tool jams, move trigger lock to the OFF position and unplug tool.
2. Remove nail pusher (see
Loading Tool,
page 5).
3. Remove unused nails.
4. Remove nail(s) causing jam.
5. If unable to clear jam, remove two screws at front of tool above nail exit to
remove plates at front of tool. Remove nail(s) causing jam. Reassemble
plates at front of tool.
6. Reload tool (see
Loading Tool,
page 5).
Cleaning
Use a clean cloth to remove dirt from tool. Do not use solvents when cleaning
plastic parts.
Lubrication
Do not oil or grease any part of tool. This may damage tool.
IMPORTANT:
Do not attempt to repair tool or replace broken parts. Any
servicing, except what is listed above, should be done by factory service center.
WARNING: This product contains chemicals known to the State
of California to cause cancer or birth defects, or other reproductive
harm.