Filter
Top Products
Safety Information
!
WARNINGICON G001
WARNING: Follow all safety precautions outlined in these operat-
ing instructions. Improper use of this tool can cause severe injury or
death from fire, electrical shock, or firing staple into body.
Before Operating Tool
1. Read and understand these operating instructions before operating tool.
2. Only well-instructed adults should operate tool. Never allow children to
operate tool.
3. Do not operate tool
• where highly flammable liquids or gases are present
• while under the influence of alcohol, medication, or drugs
• if exposed to rain or in damp or wet areas
• while tired or in a hurry
• if tool is damaged
• if trigger does not turn tool on and off. Have faulty switch replaced
by factory service center.
4. To reduce the risk of electric shock, this tool has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way.
If the plug will not fit fully in the outlet, reverse the plug. If it still will not fit,
contact a qualified electrician to install the proper outlet. Do not change the
plug in any way.
5. Use only extension cords marked for outdoor use.
6. Never use this tool
• where heavy-duty tool is needed
• where not intended - for example - don’t use tool on concrete, metal, or
glass
7. Wear snug-fitting clothing when operating tool. Do not wear loose clothing
or jewelry. They can get caught in moving parts
8. Wear the following safety gear when operating tool:
• rubber gloves (outdoors)
• footwear with non-skid soles (outdoors)
• eye protection such as safety glasses or goggles
• hair covering to contain long hair
9. Keep work area well lit.
10. Move trigger lock to the OFF position and unplug tool
• when loading tool
• when not in use
• when moving from one place to another
•before maintenance
• when changing accessories
11. Do not alter this tool in any way. Only use accessories designed for this tool.