Filter
Top Products
Be sure to use the right size extension cord. If cord size is wrong, tool may be
damaged. Tool performance may also be affected.
Extension Cord Size Requirement
1 to 25 feet, use 16 AWG rated cord
26 to 50 feet, use 14 AWG rated cord
Inspect extension cord often. Replace cord if worn or damaged.
Extension Cords
Loading Tool
Figure 2 Figure 3
Figure 1
Trigger Lock In
Off Position
1. Move trigger lock to the OFF
position (see Figure 1) and
unplug tool.
2. Turn tool upside down.
3. Press in latch lock and slide
staple chamber cover back
until fully open (see Figures 2
and 3).
Staple
Chamber
Cover
Latch
Lock
!
WARNINGICON G001
WARNING: Never load tool while it is plugged in. Accidental
discharge may occur. Before loading, move trigger lock to the OFF
position and unplug tool.
!
WARNINGICON G001
CAUTION: Use only extension cords marked for outdoor use.
Continued