Filter
Top Products
2
113267www.desatech.com
HOW TO USE
Grasp the comfort grip and with a quick
movement, strike the surface squarely
(similar to using a hammer).
HOW TO LOAD
1. Push staple feeder assembly for-
ward and slide staple feed cap up-
ward (see Figure 1).
2. Pull staple feeder assembly out of
hammer tacker.
3. Insert strip of staples, points down,
into staple channel (see Figure 2).
4. Replace staple feeder assembly
into handle with U-channel facing
down.
HOW TO DISASSEMBLE
1. Remove staple feeder assembly
and staples as indicated in loading
instructions.
2. Using a 7mm wrench and a philips-
head screwdriver, remove nut from
hinge screw.
3. Grasp tool at the head assembly
and compress magazine assembly
slightly (see Figure 3, page 3).
Figure 2 - Installing Staples and
Staple Feeder Assy.
Figure 1 - Removing Staple Feeder
Assy.
Step 1 Step 2
Push In Push Up
PRODUCT IDENTIFICATION
Head Assembly
Comfort Grip
Staple Feed Cap
Magazine Assembly
Hinge Screw/Nut
Staple Feeder Assembly
Staple Feed Cap
Magazine Assembly
Staples
(Points Down)
Staple Feeder Assembly
5. Push forward and lock staple feed
cap in place.