Filter
Top Products
8
Fig. 19
Fig. 18
Fig. 21
Fig. 22
A
Fig. 20
1. After reading and understanding this entire manual, connect tool to
air supply (Fig. 18).
2. Depress latch and slide magazine cover open (Fig. 19).
3. Insert a strip of fasteners into the side of the magazine, with
points down, in contact with the bottom of the magazine channel
(A) Fig. 20.
4. Push magazine cover closed (Fig. 21).
5. Observe the low fastener indicator (A) Fig. 22 and reload as needed.
6. Adjust directional exhaust deflector (A) Fig. 23, so that the exhaust air or
debris will be directed away from the operator. Grasp the deflector
and rotate it to the desired position for the current application.
PREPARING THE TOOL
NOTE: This tool is shipped completely assembled. No assembly time or
tools are required.
Fig. 23
A
A