Filter
Top Products
PAGE 6 SB-2-628-K
Ref. Replacement Description Individual
No. Part No. Parts Req.
1MBC-368 Retaining Ring (plated brass) 1
MSA-1 Retaining Ring (Delrin) (Optional) 1
*2 See Chart 2 Air Cap 1
#* 3 See Chart 3 Fluid Tip (nozzle) 1
+* 4 AV-1-K5 Gasket 1
5 AGHV-403 Baffle 1
6 AGX-6-K3 Fluid Outlet Plug (Kit of 3) 1
7 SSF-3156-K4 Mounting Screw (Kit of 4) 8
8 AGXV-400 Sprayhead Assembly 1
9 AGX-415 Inlet Fitting & Jam Nut 1
+* 10 — "O" Ring, Buna-N 2
+* 11 — Needle Packing, Teflon 2
+* 12 — Seal Spring 1
13 KK-4995 Gun Mounting Stud Kit (Includes 1
Items 13, 21, 22 & 24 )
14 AGX-11 Body 1
15 H-2008 Coupling 1/4 NPS(M) x 1/4 NPT(M) 1
16 H-1766 Coupling 1/4 NPS(M) x 1/8 NPT(M) 1
+* 17 — "O" Ring, Thiokol 1
+* 18 — "O" Ring, Thiokol 1
19 AGX-9 Piston 1
+* 20 — Air Packing 1
21 — Hex Hd. Cap Screw, 5/16-18 x 2-1/4 1
22 — 5/16 Lockwasher 1
23 AGG-403 Air Valve Assy. – Horn 1
24 — 1/4-28 x 1/4" Lg. Knurled 2
cup point set screw
25 AGX-2-1-K3 Adjustment Knob (Kit of 3) 1
26 34215-122 Locknut 1
●*27— Needle Spring 1
#* 28 See Chart 3 Fluid Needle Assembly 1
29 AGX-10 Back Piece 1
●*30— Outer Piston Spring 1
●*31— Inner Piston Spring (Red)
32 KK-5017 Abrasive Fluid Seal Kit (optional, 1
includes 3 seals and 1 brass collar)
+33— Abrasive Fluid Seal (U.H.M.W. Poly.) 1
1
3
Note
Apply a thin film of petroleum jelly to
the fluid needle as shown. Refer to
"LUBRICATION" on page 5 for all lubri-
cation points.
8
7
PARTS LIST
31
30
29
7
28
26
27
25
9
2
4
5
6
10
23
21
20
19
11
12
32
14
15
16
18
17
22
13
24
Torque Specifications
Ref. Torque Requirements
No. Inch or Ft. Lbs. N-m
3 20-25 ft. lbs. 27.0 - 24.0
7 30-40 in. lbs. 3.4 - 4.5
6 & 9 12 ft. lbs. 16.3
21 220 in. lbs. 21.5 - 24.9
24 30 in. lbs. 3.4
33
Recommended spare parts.
Parts included in KK-4992-1 Gun Repair Kit.
Order set, See Chart 2.
Springs included in KK-4993 Spring Kit.
*
#
●
+
Abrasive Fluid Seal
Seal
Collar
Seal (Air)
Seal
Spring
Detail Ref. No. 32 (Optional)
FIGURE 4 GUN ASSEMBLY