Filter
Top Products
19- ENG
D23757
PROBLEM
CAUSE
CORRECTION
Motor will not
run.
Check fuse box for blown
fuse and replace as neces-
sary. Reset circuit break-
er. Do not use a fuse or cir-
cuit breaker with higher rat-
ing than that specified for
your particular branch circuit.
Check for proper fuse. You
should use a time delay fuse.
Check for low voltage prob-
lem.
Check the extension cord.
Disconnect the other electri-
cal appliances from circuit or
operate the compressor on
its own branch circuit.
Have checked by a Trained
Service Technician.
Fuse blown, circuit breaker
tripped.
Extension cord is wrong
length or gauge.
Loose electrical connec-
tions.
Faulty motor.
Check the extension cord.
Check wiring connection
inside terminal box.