Filter
Top Products
English
12
Troubleshooting Guide…
TROUBLE!
DOES NOT MAKE ACCURATE CUTS
WHAT’S WRONG? WHAT TO DO…
1. Fence not adjusted correctly. 1. Check and adjust. See Fence Operation on page 6.
2. Wheel is not square to fence. 2. Check and adjust.
3. Excessive force used to make cut. 3. Reduce cutting force, let the wheel do the work.
4. Work piece moving. 4. Clamp workpiece securely. See Material Clamping and
Supporting page 5. Make sure material is laying flat against
the base.
TROUBLE!
CANNOT MOVE ARM
WHAT’S WRONG? WHAT TO DO…
1. Lock down pin is engaged. 1. Push down slightly on the arm, pull down lock down pin
and raise arm.
TROUBLE!
MATERIAL MOVES DURING CUT
WHAT’S WRONG? WHAT TO DO…
1. Fence slipping or workpiece incorrectly placed or clamped. 1. See Material Clamping and Supporting page 5.
2. Vise too loose 2. Tighten vise clamping.
3. Excessive cutting force. 3. Reduce cutting force.