Filter
Top Products
CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
For safety in use, the following accessories should be used only in
sizes up to the maximums shown in the table below.
MAXIMUM RECOMMENDED CAPACITIES
DRILL CAPACITY 3/8"
R.P.M. 0-2500
BITS, METAL DRILLING 3/8"
WOOD, FLAT BORING 1"
BITS, MASONRY DRILLING 1/2"
HOLE SAWS 1-1/8"
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO
OR HIGHER THAN NAMEPLATE R.P.M. OF TOOL WITH WHICH IT
IS BEING USED.
WIRE WHEEL BRUSHES ....................4" Diameter Maximum
WIRE CUP BRUSHES ..........................3" Diameter Maximum
BUFFING WHEELS ..............................3" Diameter Maximum
RUBBER BACKING PADS....................4-5/8" Diameter Maximum
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
DEWALT heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D
EWALT. This warranty does not apply to accessories or
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
EWALT tools are covered by our:
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D
EWALT heavy duty industrial tool, simply return it to the participating
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
5
English
FIG. 7 FIG. 8
383945/DW100-220 5/3/02 1:15 PM Page 5