DigiPower TC-1000 Battery Charger User Manual


 
FOR USE IN CAR OR TRUCK
USING 12VOLT CLA (CAR LIGHTER ADAPTOR)
USA plug remains in stored position.
Locate Car Lighter Adaptor. Plug pin connector to the 1.
bottom of the Charger.
Plug Car Lighter Plug into 12Volt Power out of the vehicle.2.
CHOSING THE CORRECT BATTERY PLATE
The TC-1000/VTC-1000 charger is designed to work with
changeable battery plates to t and charge various Li-Ion digital
camera and camcorder batteries. Each TC-1000/VTC-1000 is
packaged with battery plates to t the dierent battery models
from the same camera manufacturer.
Find the Plate labeled 1.
with the battery model
for your camera. (Battery
plates are inscribed with
the OEM battery #, as well
as the DigiPower battery
#. The battery model can
be found on the battery
label, or check the camera
instruction manual.)
English
4 |