Directed Electronics 6000 Stud Sensor User Manual


 
From this point on, when the ignition key is turned off, the VRS
®
will immediately turn on the FailSafe
®
starter kill. This will pre-
vent the vehicle from being restarted, thus immobilizing it at
that spot.
Three minutes
after the constant siren output begins,
the flashing parking lights and the siren will stop.The starter kill
will remain active until the VRS
®
system is disarmed. If the door
is opened or the ignition is turned off and on in an attempt to
restart the car, the siren and flashing lights will begin again.
Disarming the VRS
®
Take the time to familiarize yourself with the VRS
®
trigger sequence and the
disarm procedure. It is important to recognize the VRS
®
and know how to dis-
arm it in case of accidental activation.
Disarming the VRS
®
is always the same whether it is triggering or not.
Once again, if VRS
®
is armed, it does not disarm automatically.You must dis-
arm it the next time you operate the vehicle.You must manually disarm it fol-
lowing this procedure:
With the ignition key in the "RUN" position, press
the VRS
®
button NOT the arm/disarm button on
the remote control). Remember, neither the
transmitter nor the Valet
®
button will disarm the
VRS
®
feature. Only the hidden arm/disarm button
can disarm VRS
®
.
16
© 1996 Directed Electronics, Inc.