Directed Electronics 6000 Stud Sensor User Manual


 
3
© 1996 Directed Electronics, Inc.
What is included
The control module
A pair of two-button transmitters
A Stinger
®
DoubleGuard
®
dual-output shock sensor
The Revenger
®
Soft Chirp
®
six-tone programmable siren
The red Status LED indicator light
A push-button Valet
®
switch
Your warranty card
FailSafe
®
starter kill (Ready feature, may require additional labor).
CONGRATULATIONS on your purchase of a state-of-the-art vehicle securi-
ty system. This system has been designed to provide years of trouble-
free operation. Due to the complexity of this system, it must be installed
by an authorized dealer only. Installation of this product by any other
person other than an authorized dealer voids the warranty. All dealers
are provided with a preprinted dealer certificate to verify that they are
authorized.
THE SYSTEM REQUIRES NO SPECIFIC MAINTENANCE. Your remote control is
powered by a miniature 12V battery, type GP23A, that will last about a
year under normal use.When the battery weakens, operating range will
be reduced and the LED on the remote will light dim.
YOUR WARRANTY card must be returned and the bar code serial number
must not be removed.If the warranty card is not returned you don’t have
a warranty. It is also necessary to keep your proof of purchase which
reflects that the product was installed by an authorized dealer. Make
sure you receive the warranty card from your dealer.
THIS OWNERS GUIDE should help you to get the most out of your system.
Please take the time to read it thoroughly, prior to using the system.