Dremel 100 Grinder User Manual


 
22
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
502, 503, 504, 10 8210 8-10 ---
505
Flapwheels
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
511E, 512E 66 4 6 6 - - -
Finishing Abrasive Buffs
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
150 10 8-10 2-4 -6---
Drill Bit
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
569,570 For Use on Wall and Floor Grout 6-8
Grout Removal Bits
Speed Settings (Continued)
* Speed for light cuts; Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
2 = 5,000 - 8,000 RPM's 4 = 9,000 - 15,000 RPM's
6 = 16,000 - 21,000 RPM’s 8 = 22,000 - 27,000 RPM’s 10 = 28,000 - 32,000 RPM’s
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
EZ471SA, 2-6 2-6 2-4 2-6 2-6
EZ472SA,
EZ473SA
Detail Abrasive Brushes
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
662DR, -- - - - 4-6 4-6 4-6
663DR
Glass Drilling Bits
DM 2610015339 05-11:DM 2610015339 05-11.qxp 5/12/11 9:41 AM Page 22