Filter
Top Products
20 21
CLEANING
To avoid accidents always
disconnect the tool from
the power supply before cleaning or
performing any maintenance. The Mini Saw
Attachment may be cleaned most effectively with
a damp cotton swab or compressed dry air.
Always wear safety goggles when cleaning
tools with compressed air.
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through openings.
Certain cleaning agents and
solvents damage plastic parts.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
CARE OF BLADES
Blades become dull even from cutting regular
lumber.If you find yourself forcing the rotary tool
forward to cut instead of just guiding it through
the cut, chances are the blade is dull or coated
with wood pitch.
!
CAUTION
When cleaning gum and wood pitch from blade,
unplug the rotary tool and remove the blade.
Remember, blades are designed to cut, so
handle carefully. Wipe the blade with kerosene
or similar solvent to remove the gum and pitch.
A dull or damaged blade slows the speed of
cutting and places a heavier load on your rotary
tool, and can cause KICKBACK. Keep extra
blades on hand so you always have sharp,
efficient blades ready to replace a dull or
damaged one.
Use only Dremel Saw Blades with your saw
attachment.
!
WARNING
5716 Dremel 2.625x4.25 6/18/02 10:31 AM Page 20