Filter
Top Products
5
ASSEMBLY
1. Remove the collet nut, collet and hous-
ing cap from rotary tool.
NOTE: Housing cap must be re-installed on
rotary tool when XPR MultiSaw is removed.
2. Install driver nut onto rotary tool shaft.
3. Thread the saw onto the rotary tool
housing and tighten overthrow nut
securely. Saw should be positioned so
Dremel markings on tool and saw are
facing same side.
NOTE: Be sure to align keys on tool with key-
ways in overthrow nut.
Installing Saw to Rotary Tool
5
GETTING TO KNOW YOUR XPR MULTISAW
Unpacking & Checking Contents
Disconnect the plug from
the power source before
making any assembly, adjustments or
changing accessories.
Such preventative
safety measures reduce the risk of starting
the tool accidentally.
Separate all loose parts from packing materi-
als and check each item with the contents
listed on the carton to make sure all items are
accounted for before discarding any packing
material.
IMPORTANT! If any parts are missing, or if
you require any assistance with these
instructions, please contact Dremel™
Consumer Service at:
1-800-437-3635
or at www.Dremel.com.
WARNING
!
Housing
Air Vents
Overthrow Nut
Driver Nut
Saw Blade
Footplate
Collet Nut
Driver Nut
Collet
Housing Cap
Overthrow Nut
Be sure to align keys on tool
with keyways in overthrow nut.
Rubberized Grip
Allen Wrench (2.5 mm)
(for blade installation)
Description
The XPR MultiSaw attachment is for use with
Dremel™ 400 Series XPR Rotary tool only.
The Dremel XPR MultiSaw turns your rotary
tool into a multipurpose saw that will allow
you to make straight and curved cuts in a
variety of materials. Scroll cutting patterns is
now fast and easy. Using standard jigsaw
blades, you can cut soft & hard wood, ply-
wood, metal, PVC, plastic, and much more!
Dremel recommends the use of Dremel XPR saw blades.
The XPR MultiSaw
comes with a saw blade for straight and curved cuts in wood and soft materi
-
als up to 1-7/16" thick.
The Dremel XPR MultiSaw accepts all standard
jigsaw
blades, both “T” or “U” shank.
“T” Shank Blade
“U” Shank Blade
No one blade can be efficient for all cutting jobs. Different materials require different blades.
Since your saw can cut so many materials, be sure to use the proper blade for the job to
ensure proper cutting performance.
NOTE: Refer to blade packaging for information on recommended materials and blade usage.
Blade Selection
DM 2610922740 8-04 E.qxd 8/10/04 8:20 AM Page 5