Dremel MS400 Saw User Manual


 
8
Your Dremel™ product is warranted against defective material or workmanship for a period of one year from date of purchase. In
the event of a failure of a product to conform to this written warranty, please take the following action:
1. DO NOT return your product to the place of purchase.
2. Carefully package the product by itself, with no other items, and return it, freight prepaid, along with:
A. A copy of your dated proof of purchase (please keep a copy for yourself).
B. A written statement about the nature of the problem.
C. Your name, address and phone number to:
UNITED STATES
Dremel Service Center Dremel Service Center
4915 21st Street OR 4631 E. Sunny Dune
Racine, WI 53406 Palm Springs, CA 92264
CANADA OUTSIDE
Giles Tool Agency CONTINENTAL UNITED STATES
6520 Lawrence Av. East See your local distributor or write to
Scarborough, Ont Dremel, 4915 21st Street
Canada M1C 4A7 Racine, WI 53406
W
e recommend that the package be insured against loss or in transit damage for which we cannot be responsible.
This warranty applies only to the original registered purchaser. DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING,
ACCIDENT, ABUSE, NEGLIGENCE, UNAUTHORIZED REPAIRS OR ALTERATIONS, UNAPPROVED ATTACHMENTS OR
OTHER CAUSES UNRELA
TED
TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WAR-
RANTY.
No employee, agent, dealer or other person is authorized to give any warranties on behalf of Dremel. If Dremel inspection shows
that the problem was caused by problems with material or workmanship within the limitations of the warranty, Dremel will repair
or replace the product free of charge and return product prepaid. Repairs made necessary by normal wear or abuse, or repair
for product outside the warranty period, if they can be made, will be charged at regular factory prices.
DREMEL MAKES NO OTHER WARRANTY OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, AND ALL IMPLIED WAR-
RANTIES OF MERCHANT
ABILITY
AND FITNESS FOR
A PARTICULAR PURPOSE WHICH EXCEED THE ABOVE MENTIONED
OBLIGATION ARE HEREBY DISCLAIMED BY DREMELAND EXCLUDED FROM THIS LIMITED WARRANTY.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
The obligation of the
warrantor is solely to repair or replace the product. The warrantor is not liable for any incidental or consequential damages due to any
such alleged defect. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limita-
tions or exclusion may not apply to you.
For prices and warranty fulfillment in the continental United States, contact your local Dremel distributor.
DREMEL™ LIMITED WARRANTY
SERVICE PARTS & DIAGRAM
88
CLEANING
To avoid accidents, always
disconnect the tool from
the power supply before cleaning or per-
forming any maintenance.
The tool may be cleaned most effectively
with compressed dry air. Always wear safe-
ty goggles when cleaning tools with com-
pressed air.
WARNING
!
V
entilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through openings.
Certain cleaning agents
and solvents damage plas-
tic parts. Some of these are gasoline, car-
bon tetrachloride, chlorinated cleaning sol-
vents, ammonia and household detergents
containing ammonia.
WARNING
!
DM 2610922740 8-04 E.qxd 8/10/04 8:20 AM Page 8