Filter
Top Products
3
1. INTRODUCTION
Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding
and bending plastic as well as general drying and thawing purposes.
WARNING! For your own safety read this instruction manual and general
safety instructions carefully before using the appliance. Your power tool
should only be passed on together with these instructions.
2. DESCRIPTION
① Nozzle
② Ventilation Slots
③ On/Off & Control Switch (0/1/2 settings)
④ Temperature & Air Flow Adjusting Buttons
⑤ LCD Digital Display
3. UNPACKING
Remove all packing materials.
Remove remaining packaging and transit supports if any.
Check all contents are included in the packaging.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
It is recommended to keep the packaging materials until the end of the specified warranty
>>period. Dispose of relevant materials using your local waste disposal system on expiry of
>>warranty.
WARNING! Packing materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
4. PACKING LIST
Heat gun
Set of accessories (see page 7 for a list of accessories)
Instruction manual
When parts are missing or damaged, please contact your dealer.
5. GENERAL POWER TOOL SAFETY WARNING
Read all safety warnings and instructions. Failure to follow such may result in electric shock,
fire and/or serious injury. Save all safety warnings and instructions for future reference.
5.1 WORK AREA SAFETY
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.