Filter
Top Products
If you need to fit a plug to the mains lead, this should be
fitted in accordance with the wiring instructions below,
and will need to be used with a 5 amp fuse. If in doubt
consult an electrician.
If you are using an extension lead it must be rated at a
minimum of 6 amps and fully unwound. Do not operate
with a lead rated at less than 6 amps as this will cause
premature failure of the motor which is not covered by
the guarantee.
As the colours of the wires in the mains lead of the
application may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.
23