Filter
Top Products
Wand
Shut-off
Valve
Retaining Nut
O-ring
NOZZLE ASSEMBLY
Figure 1-2
Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to
the elbow (5). Unscrew the retaining nut (2). Push the nozzle body (3) with the nozzle gasket
(4) out of the retaining nut (2). To reinstall the nozzle, reverse the above instructions.
Figure 3
Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining
nut. To reinstall the nozzle, reverse the above instructions.
APPLICATIONS & USE FOR YOUR SPRAYER
Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals
have already been used in the sprayer. If a sprayer has been used for plant protection or as an
herbicide, clean the sprayer completely (see cleaning section) before using.
Plant Food
: Use different spray patterns for optimum foliage feeding or for fungicide and
pesticide application.
Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant
feeding or protection without thoroughly cleaning (see cleaning section) the sprayer first.
General Household Use: Apply detergents, vinegar, cleaning solutions, warm water (do not
exceed 120°F/49°C) or nontoxic household cleaning chemicals for carpets, floors, walls, glass,
counter tops and ceilings. DO NOT use sprayer that has been used with herbicides, pesticides or
other toxic chemicals for household applications.
General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general
purpose cleaning. Other applications include wood preservatives, waxes, water proofing, and
diluted household bleach (max. 1 part household bleach to 9 parts water solution).
2E
3. Nozzle
Body
2. Retaining
Nut
5. Elbow
4. Nozzle
Gasket
Figure 1 Figure 2 Figure 3
1. P
oly
Nozzle Ca
p
1. Brass
Nozzle Cap
Elbow
Nozzle
Gasket
Fan Nozzle Tip
Retaining Nut
2. Retaining
Nut
3. Nozzle
Body
4. Nozzle
Gasket
5. Elbow
SPRAYER COMPONENTS & USE INFORMATION
WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand.
Insert the wand into shut-of f valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
Joint torique
du tube
Joint torique du coude
Joint d’étanchéite
de boyau
Joint d’étanchéité
de buse
999441004856
Trousse de
joint torique
99944100472
Sangles
99944100475
Assemblage du
piston à pompe
Plaque porte-
soupape
Joint torique
supérieur
Joint torique
inférieur
Collier de
piston
99944100474
Assemblage du
cylindre
du piston
99944100471
Trousse de réparation de
pompe à piston
Joint torique -
cylindre du piston
Joint torique -
chambre de pression
Collier -
pompe à piston
Plaque
porte-
soupape -
cylindre
du piston
99944100488
Pinces du tube
INFORMATION DE COMMANDE DE PIÈCES DE RECHANGE
99944100473
Panier du filtre et
bouchon
99944100489
Traitement de pompe
ECHO, INCORPORATED
400 Oakwood Road, Lake Zurich, IL 60047
www.echo-usa.com