Filter
Top Products
CMY ZOOM 250™
©Elation Professional® Los Angeles, Ca. 90058 - CMY ZOOM 250™ - -
deactivate this function.
6. Press MODE/ENTER to confirm.
7. Press EXIT to return to the main menu.
VER - Use this function to display the Software version of the unit.
1. Access the main menu.
2. Tap the UP button until SPEC is displayed, press MODE/ENTER.
3. Tap the UP button until VER is displayed, press MODE/ENTER.
4. The display will show V-1.0”, the display may also show, V-2.0”, V-9.9 etc.
5. Press ENTER or EXIT/DN to exit. EDIT - This menu item allows you to write a
program into the memory (EEPROM) via the control panel or via the external
controller.
RUN With the function RUN , you can run your pre-made program. You can set the
number of steps under Step (S-01- S-48). You can edit the individual scenes under Edit.
1. Access the main menu.
2. Tap the UP button until EDIT is displayed, press MODE/ENTER.
3. Tap the UP button until RUN is displayed, press MODE/ENTER.
4. “AUTO is displayed. If you press the UP button it will show SOUN . Select
which one you want to activate, and press ENTER.
5. Press UP, to select ALON or NAST . Which mean stand alone, and
master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
STEP - With this function you can program the number of steps in your individual
Program.
1. Access the main menu.
2. Tap the UP button until EDIT is displayed, press ENTER.
3. Tap the UP button until STEP is displayed, press ENTER.