Filter
Top Products
Platinum Spot 5R™
©Elation Professional, Los Angeles Ca. 32 www.ElationLighting.com
Mic Sensitivity – This function makes the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
Hibernation – When activated, this function will automatically put the fixture in
power stand-by mode after a defined period of time of no DMX activity. This prevents
the fixture form expending power for extended periods in the event the fixture has
been left on accidently. In stand-by mode the lamp and all motors will power down if
no DMX signal is sent to the fixture for a period of 15 minutes (default, can be user
defined). The fixture will automatically reset and return to normal operation once a
DMX signal is sensed.
V1.0 Mode – This function should only be activated when intergrading first
generation Platinum Spots (Ver 1.0) with second generation or higher Platinum
Spots (Ver 1.1 or higher). This function will match the gobo rotation speed to that of
the first generation fixtures. When this function is not activated the gobo change will
not match between the different generation fixtures.
9.4.2 Fans Control - This function is used to change the functionality of the internal
cooling fans. The available selections are: 1) “AUTO” – The fans will automatically
switch between low and high speeds depending on the internal operating temperature. 2)
“HIGH” – The fans will run in high-speed mode regardless of operating temperature. 3)
“LOW” – The fans will remain in low speeds regardless of internal operating
temperature.
9.4.3 Display Settings
Shutoff Time - The display is designed to turn off during normal operation to avoid
excessive light in situations that require an extremely dark environment. This
function will adjust the amount of time the display will remain on until it is automatic
turned off. This function is disabled as default.
Display Reverse – This function will allow the entire display to be flipped by 180˚ to
allow for better view when the fixture is hung from truss or a ceiling. This function is
disabled as default.