Filter
Top Products
Event MH™
©Elation Professional® 6 Event MH™
2. SAFETY INSTRUCTIONS
The Event MH™ is an extremely sophisticated piece of electronic
equipment. To guarantee a smooth operation, it is important to
follow the guidelines in this manual. The manufacturer of this
device will not accept responsibility for damages resulting from
the misuse of this fixture due to the disregard of the information
printed in this manual.
1. Always be sure that the fan and the air inlets remain clean and are never blocked.
Allow about 6” (15cm) between this fixture and other devices or a wall to allow for
proper cooling.
2. Never touch the fixture during normal operation. This can cause severe personal
injuries and/or damage to the fixture.
3. Be sure to unplug the EVENT MH™ from the power outlet before performing any
service related issues.
4. Lamp Replacement; Allow at least 30 minutes after disconnecting main power
before you open the EVENT MH™. To prevent personal injury, never touch the
lamp if you are not absolutely sure it has cooled.
5. Never look directly into the lamp beam. You risk injury to your retina, which may
induce blindness.
6. Be sure to track and record the lamp running time. The lamp should be changed at
the end of the specified lamp life, regardless of lamp output. You may also have to
change the lamp if it shows any deformations or damage. The same is with all
glass components, color filters, lenses and mirrors.
7. For safe operation, follow the Installation guide described in chapter two of this
manual. Operating the EVENT MH™ without suited safety aids such as safety
cables or clamps can increase the risk of damage and/or personal injury.
8. Installation should only be performed by qualified and certified personal.
9. When mounting this fixture, use only the original rigging parts included with this
fixture. Any structural modification will void the original manufactures warranty and