![](http://pdfasset.owneriq.net/d/6c/d6cb50bf-09a4-5834-fddb-4e5540c24757/d6cb50bf-09a4-5834-fddb-4e5540c24757-bg2f.png)
Design Spot 250™
©Elation Professional® 47 Design Spot 250™
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its
driver circuit on the main PCB). The focus motor is not located in the default position after
the reset.
13Er - Iris-error
This message will appear after the reset of the fixture and if the magnetic indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its
driver circuit on the main PCB). The Iris motor is not located in the default position after the
reset.