Elektra Beckum 4 DN Saw User Manual


 
2.13
PK 255
Universal fence adjustments
1. Check if fence is square against saw blade with
a try square.
2. If necessary, loosen fixing screws and adjust
mitre scale.
3. Retighten fixing screws.
Cleaning the saw
1. Lay machine on its side.
2. Remove chips and saw dust with vacuum
cleaner or brush:
- from saw blade setting guide elements
- from motor vent slots
Machine transportation
· Lower saw blade completely before transporta-
tion.
· Use original packing, if possible.
Machine storage
A
Danger!
Store machine so that
- it can not be started by unauthorized per-
sons, and
- nobody can get injured.
3
The on/off buttons can be blocked with a pad-
lock.
A
Caution! Do not store machine outdoors or in
damp environment without protection.
Service plan
30
45
15
0
15
30
45
Before switching ON
- Chip ejection
(when operated
without dust collec-
tion) and
- table slot
Visual check if unob-
structed by chips.
Riving knife Visual check if dis-
tance saw blade – riv-
ing knife is 3...8 mm.
Monthly (if used daily)
Clean guide elements
for saw blade setting
- threaded rods for
blade rise and fall;
- swivel segments.
- Remove chips with
vacuum cleaner or
brush;
- apply light coat of
oil to guide ele-
ments.
Power cable Check for damage, if
necessary have
replaced by a qualified
electrician.
Every 300 hours of operation
Saw blade drive belt Check tension (R 5
mm)
All screwed connec-
tions
Check, retighten if nec-
essary (except saw
blade longitudinal shift
setting screws).