www.easyheat.com
Heating cable control options and power
connection
For 120 Volt cables, the heating cable can be simply plugged
into a ground fault protected electrical receptacle, when icing
conditions are present on the roof. The (optional) EasyHeat RS-2
Roof Sentry (120 Volt) control can be used to automatically
ensure cables are energized only when icing conditions are
present on the roof, minimizing energy consumption and
extending cable life.
For 240 Volt cables, the cable is designed to be directly
connected into an appropriate electrical connection box.
Since it will be necessary to remove power from the cable from
time to time, such as in summer, always connect the cable to
an appropriate double-pole electrical switch. If the heating
cable is the only load on the circuit, the branch circuit breaker
may be used to disconnect power from the cable (switch is
not necessary). Several automatic controls are available from
EasyHeat.
Always connect a pilot light into the circuit of 240V cables to
indicate when the cables are energized.
Testing the system. Once the installation is complete, apply
power to the heating cable; the surface of the cable will feel
warm after about 15 minutes.
Operation
If no automatic controls are installed, energize the cable only
when icing conditions are present on the roof, and de-energize
when icing conditions are no longer present. For 120 Volt models
only, the power cord plug contains a pilot light indicating that
power is being applied to the cable. Ensure power is removed
from the cable/control in summer.
Maintenance
Check cable annually for any damage, such as nicks or cuts
possibly caused by animals or other activity on the roof. Check
any ground fault protection devices for proper operation.
Remove all debris (leaves, twigs, pine needles, etc.) from roof,
gutters and downspouts prior to energizing the roof cable. Do
not attempt to energize the roof cable if any of these problems
are discovered.
LIMITED WARRANTY AND LIABILITY
EasyHeat warrants that if there are any defects in material
or workmanship in this product during the rst twelve (12)
months after the date of its purchase, we will replace the
product with an equivalent model, not including any labor
or other installation costs.
Our obligation to replace the product as described above
is conditioned upon (a) the installation of the product
conforms to the specications set forth in our installation
instructions and (b) the product not having been damaged
by unrelated mechanical or electrical activities.
Product replacement as described above shall be your sole
and exclusive remedy for a breach of this warranty. This limited
warranty does not cover any service costs relating to repair
or replacement.
We shall not be liable for any incidental, special or
consequential damages as a result of any breach of this
warranty or otherwise, whether or not caused by negligence.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
The warranty above is exclusive and makes no other warranties
with respect to description or quality of the product. No
afrmation of fact or promise made by us, by words or action,
shall constitute a warranty. If any model or sample was shown
to you, the model or sample was used merely to illustrate the
general type and quality of the goods and not to represent
that the goods would necessarily be of that type or nature. No
agent, employee or representative of ours has authority to bind
us to any afrmation, representation or warranty concerning
the goods sold unless such afrmation, representation or
warranty is specically incorporated by written agreement.
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PARTICULAR PURPOSE THAT MAY ARISE IN CONNECTION
WITH THE SALE OF THIS PRODUCT SHALL BE LIMITED IN DURATION
TO TWELVE (12) MONTHS FROM THE DATE OF PURCHASE. WE
DISCLAIM ALL OTHER IMPLIED WARRANTIES, UNLESS WE ARE
PROHIBITED BY LAW FROM DOING SO, IN WHICH CASE ALL
SUCH IMPLIED WARRANTIES SHALL EXPIRE AT THE EARLIEST TIME
PERMITTED BY APPLICABLE LAW. Some states do not allow
limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
This warranty gives you specic legal rights, and you may also
have other rights which vary from state to state or province
to province.
To obtain a replacement under this warranty any inoperative
product or component must be returned, with proof of
purchase, to EasyHeat at the addresses noted herein. Buyer is
responsible for all costs incurred in removal and re-installation
of product and must pre-pay shipment to factory or point of
purchase.
In CANADA
99 Union St.
Elmira, Ont. N3B 3L7
Tel. (800) 794-3766 • Fax (800) 361-4574
In USA
2 Connecticut South Drive
East Granby, CT 06026
Tel. (800) 537-4732 • Fax (800) 541-7451