EnGenius Technologies ECB350 Router User Manual


 
40
DHCP
Internet Connection Type Select DHCP to begin configuration of the DHCP connection.
Account Name Enter the account name provided by your ISP.
Domain Name Enter the domain name provided by your ISP.
MTU Specify the Maximum Transmit Unit (MTU) size. It is recommended that you accept the default
setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or
too low, which impacts network performance. In extreme cases, an MTU setting that is too low can
prevent the ECB350 from establishing some connections.
Get Automatically From
ISP
Click this radio button to obtain the DNS automatically from the DHCP server.
Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Discard Ping on WAN Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on
the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to
test whether the IP address is valid. Blocking pings provides extra security from hackers.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings.