Filter
Top Products
67
8.4 Wireless MAC Filter
Wireless MAC Filters are used to allow or deny network access to wireless clients according to their MAC addresses. You
can manually add a MAC address to restrict the permission to access ECB350. The default setting is Disable Wireless MAC
Filter.
Note: Only applicable in Access Point, WDS AP, and Router mode.
Wireless Filter (Access Point / WDS AP / Router mode)
ACL Mode Determines whether network access is granted or denied to clients whose MAC addresses
appear in the MAC Address table on this page. Choices are: Disabled, Deny MAC in the list, or
Allow MAC in the list.
MAC Address Enter the MAC address of the wireless client.
Add Click Add to add the MAC address to the MAC Address table.
Delete Delete the selected entries.
Apply Click Apply to apply the changes.