Filter
Top Products
GXW
7 901 04
GXC
7 901 03
GX 75 /
GX 75 2H
1.
2.
3.
11
Quality surface nishes are always assured with the GXC.
Included are two nylon and one brass guide rail for all your
nishing needs. The brass rail is used for wet or dry nishing
on rough surfaces such as corrosion, scale, etc. The nylon rail
is used for wet nishing on sensitive materials when a highly
polished surface is required.
Perfect surface quality and high process speeds on pipes
and shafts are no problem for the GXC cylindrical grinding
module. Even commercially available eece belts can be
used in connection with the GX 2H basic unit. The feed rate
can be adjusted for various materials through an innite range
up to 6.6 ft/min (2 m/min).
There are several arguments for wet grinding using the GXW
cooling lubricant module: A liquid coolant captures the metal
dust, which increases the service life of the sanding belts; the
nishing results are noticeably improved; and thanks to the
reduction of heat generated during grinding the corrosion risk
for stainless steel pipes is reduced. A self contained, closed
circulation system minimizes coolant consumption.
Belt grinder
(basic units)
Cooling
lubricant
module
Cylindrical
grinding
module
Cylindrical grinding machine
“Centerless”
Quickbrilliantresultsallaround
Alwaysontherighttrack
GXWforwetgrinding